DTF
Full color, ready to press, DTF printed transfer. These transfers can be used on tshirts, sweatshirts, hoodies, and most any other apparel items that are cotton or cotton/poly blends. THIS IS JUST FOR THE IMAGE TRANSFER, no digital image will be provided, nor will a completed apparel item be sent.
You must have a heat press to use this item.
Temp settings: 320-338 degrees F,
Time: 15 seconds,
Pressure: Med/Firm 5-7 (50-70psi)
Use parchment paper/teflon sheet over transfer
COOL Peel - must let transfer cool completely prior to removing (this process may take several minutes)
Transfer will be glossy - for matte look, replace on press and press again without teflon for 5-10 seconds.

Sublimation
Sublimation is a transfer that is printed using special ink that when pressed on a high polyester count apparel item will fuse the ink into the item for a completely vibrant seamless feel. For best results, 100% polyester is recommended; however, anything above 50% polyester will work. Just understand that the less the polyester count, the less vibrant the colors from the transfer will be and will fade over time with washing. With sublimation WHITE DOES NOT PRINT, so keep that in mind if you are using a color item other than white, the areas that appear white in the transfer will be the color of the apparel item.

You must have a heat press for sublimation transfers.
Temp settings: 360-385 degrees F,
Time: 60-80 seconds,
Pressure: Firm/Heavy
Place parchment paper in between apparel item to ensure that transfer does not bleed to the back of the item. Place transfer, cover with parchment and teflon. You may wish to secure transfer with heat transfer tape to prevent movement or you may get a shadow effect on your item.

*It is recommended to trim/tear around the sublimation transfer to avoid harsh lines and unwanted ink spots that may have printed during the printing process prior to pressing*